导热油炉是基于强制循环的设计思维而开发的直流式特种锅炉。
封闭循环供热,通过膨胀油槽与大气相通,液体输送热能,热损失少,节能,环保效果好。
本体采用烟气三回程盘管设计,这种直流式结构,决定了传统锅炉所不具有的安全性。
由于采用盘管设计,因此,受热面充足,使其有较高的热效率。
导热油锅炉,显著的特点是逆流换热,燃烧排烟温度与热导油出口温差在30%左右。
导热油锅炉具有的性能结构、简洁的结构,主要是在较低的压力下运行,获取450C左右的工作温度,具有低压高温特点。
使用导热油作为热载体的油、气的热载体锅炉,系统应配备膨胀槽,储油罐、安全组件、测量仪表和控制装置,循环油泵应一用一备并与燃烧机互为为连锁。
为确保导热油的正常使用寿命和导热效果,严禁超温使用。
Heating conducting oil boiler is a direct special boilerbased on circulation compulsion design ideas.
Closed circulation heating connected to the atmospherecan prolong the life of the boiler. Liquid phase transportationof heat minimizes the loss the heat. The result of energysave is significant and the protection of the environment isgreat.
The body uses three -loop piping design. This is a directcirculation structure The design decides the safety notpossessed by traditional boiler.
Due to the piping design the heating surface is abundantith high efficiency in heatinga obvious characteristic of heat conducting oil boiler isreverse heat circulation. The difference of temperaturesbetween combustion exhaustion and heat conducting oil isbelow 30C.
The excellence of the structure of the heat conducting oilboiler to operate under low pressure to obtain workingtemperature below 450C. These is its characteristics of lowpressure and high-temperature.