品牌：RETZ/我们一直致力于流体控制和测控领域的持续创新，始于2005……开关型,智能直行程电动执行器采用先进的DSP系统双密封防水外壳，"非侵入式"红外设定以及全面的防护系统，使retz电动执行器的准确控制和高可靠性得到完善的结合
The switch type, intelligent direct stroke electric actuator adopts an advanced DSP system with double sealed waterproof casing, a "non-invasive" infrared setting, and a comprehensive protective system, which perfectly combines the precise control and high reliability of the retz electric actuator
非侵入式-终身密封 Non-intrusive - lifetime sealing
IQC系列执行器的现场调试无需卸掉电气箱端盖。所有设定和调整均使用提供的红外线设定器来完成。在RETZ的受控环境中组装后，空气的对流就被杜绝了、所有的内部元件都得到终身的保护。非侵入式控制意味着没有穿过控制箱体的贯通轴 The on-site commissioning of IQC series actuators does not need to remove the end cover of the electrical box. All settings and adjustments are completed using the provided infrared setter. After assembly in the controlled environment of RETZ, air convection is eliminated and all internal components are protected for life. Non-intrusive control means that there is no through shaft through the control box
排除故障简便 Easy troubleshooting
IQC系列执行器易读的、带有背景照明的显示器提供了阀门运行状况、控制和执行器报警的图标 The easy-to-read display with background lighting of IQC series actuator provides icons for valve operation status, control and actuator alarm
帮助屏幕 Help screen
用IQC设定器可调出九个帮助屏幕，因而能够对控制信号，阀门和执行器状态以及指示状态进行实时、分组分析 With IQC setter, nine help screens can be called up, which enables real-time and grouping analysis of control signals, valve and actuator status and indication status
阀门力矩指示 Valve torque indication
用IQC设定器通过液晶显示器以实时观察对应于阀位的阀门力矩，因此对阀门工作条件的分析成为一个标准功能 The IQC setter is used to observe the valve torque corresponding to the valve position in real time through the LCD display, so the analysis of valve working conditions becomes a standard function
条件控制 Condition control
对于有高安全性要求的应用，要求IQC组态为条件控制。在这一方式下，操作取决于两个独立的信号。以关阀命令为例，同时提供一个远程关阀输入信号和关阀联锁输入信号，执行器将操作，关闭阀门。如果只提供一个信号，或一个信号丢失，执行器将保位或停止以防止故障。当组态为有条件的远程控制时，就地操作无需联锁输入 For applications with high security requirements, IQC is required to be configured as conditional control. In this mode, the operation depends on two independent signals. Taking the valve closing command as an example, a remote valve closing input signal and a valve closing interlock input signal are provided at the same time, and the actuator will operate to close the valve. If only one signal is provided or one signal is lost, the actuator will hold or stop to prevent failure. When configured as conditional remote control, local operation does not require interlocking input
屏幕上的诊断图标 Diagnostic icon on screen
液晶显示器中有四个专用报警图标，可以清晰地显示阀门，控制系统和执行器的报警 There are four special alarm icons in the LCD, which can clearly display the alarm of valve, control system and actuator
相同步器 Same step
IQC优秀的相同步器自动同相调整装置，用以防止因电源接线不正确耐导致阀门损坏，可确保三相电机始终具有正确的电源相序 IQC's unique automatic in-phase adjustment device for the same step is used to prevent the valve from being damaged due to incorrect power wiring, which can ensure that the three-phase motor always has the correct power phase sequence
单相保护 Single-phase protection
为进一步防止电机过热，IQC的电子装置不断监视着电源的三相。如果一相或多相丢失，可以防止控制电路将接触器激励。作为标准功能，可以获得电源掉相时的现场和远程报警 To further prevent the motor from overheating, IQC's electronic device continuously monitors the three-phase power supply. If one or more phases are lost, the control circuit can be prevented from energizing the contactor. As a standard function, it can obtain the on-site and remote alarm when the power supply is out of phase
过热保护 Overheat protection
IQC在电机线圈内装有两个热保护继电器，用以直接检测线圈的温度。如果线圈过热，可将执行器的控制电路断开 IQC is equipped with two thermal protection relays in the motor coil to directly detect the temperature of the coil. If the coil is overheated, the control circuit of the actuator can be disconnected
远程诊断-IrDATM
IQC系列执行器利用lrDA实现快速、安全、非侵入式的通讯和标准化数据交换。执行器的设定组态可以被分析和改变。每台IQC/IQTC均包括一个内置的数据记录器。我们可以对诸如阀门力矩分布、执行器事件及统计等操作数据的分析进行解释并给出建议。记录的数据信息也可以通过lrDATM兼容PDA传到用户进口直行程电动执行器6.jpg的现场总部。经过分析、更改执行器的设定组态后，再传送回执行器 IQC series actuators use lrDA to realize fast, safe, non-intrusive communication and standardized data exchange. The setting configuration of the actuator can be analyzed and changed. Each IQC/IQTC includes a built-in data recorder. We can explain and give suggestions on the analysis of operating data such as valve torque distribution, actuator events and statistics. The recorded data information can also be transmitted to the user's on-site headquarters through lrDATM compatible PDA. After analyzing and changing the setting configuration of the actuator, it will be sent back to the actuator.
Modbus模块的
采用Modbus模块的IQC系列执行器，使用RS485数据总线连接，采用Modbus的RTU通讯协议，可以38.4Kbit/s速度传输数据，能够方便的在目前流行的组态软件中进行组态，提供执行器全部控制功能及反馈数据的现场总线通讯。总线控制系统自动切换到能够正常的通信模块，保证系统正常运转 IQC series actuators using Modbus module, connected by RS485 data bus, can transmit data at a maximum speed of 38.4Kbit/s using Modbus RTU communication protocol, and can be easily configured in current popular configuration software, providing field bus communication of all control functions and feedback data of the actuator. The bus control system automatically switches to the normal communication module to ensure the normal operation of the system
瞬时反转保护 Instantaneous reverse protection
在执行器接到瞬时反转命令时，自动延时电路用以防止冲击负载对阀杆和齿轮箱所产生的不必要的磨损 When the actuator receives the instantaneous reverse command, the automatic delay circuit is used to prevent unnecessary wear of the valve rod and gear box caused by the impact load. The circuit can also limit the surge current through the contactor
自动自检测和诊断功能（ASTD）Automatic self-test and diagnosis function (ASTD)
在任何时刻，一旦执行器接通电源，它将自动检测操作电路，以确保正解的操作。对于很少发生的设备故障，可以被诊断出来并以图标方式自动显示在屏幕上，同时执行器的电动操作将被禁止，以便于现场维护 At any time, once the actuator is powered on, it will automatically detect the operation circuit to ensure the correct operation. For rare equipment faults, they can be diagnosed and automatically displayed on the screen in the form of icons. At the same time, the electric operation of the actuator will be prohibited to facilitate on-site maintenance
Profibus
采用SPC3专用集成芯片设计的Profibus DP的全部功能实现兼容EN50170标准。数据传输速率为9.8Kbit/s，每个报秒文的数据量多大244个字节，安的响应时间从几百微秒几百毫秒。传输介质为屏蔽双绞线或光纤。隔离技术，消除来自外部的干扰。根据用户要求，还可以提供DN、HAT、FF等标准的现场总线接口 All functions of Profibus DP designed with SPC3 ASIC are compatible with EN50170 standard. The data transmission rate is 9.8Kbit/s, the amount of data per second is 244 bytes, and the response time of A is from hundreds of microseconds to hundreds of milliseconds. The transmission medium is shielded twisted pair or optical fiber. Isolation technology to eliminate external interference. According to the user's requirements, it can also provide DN, HAT, FF and other standard fieldbus interfaces
总线控制系统 Bus control system
现场总线是当今工业控制技术领域的发展趋势。IQC系列执行器采用专用的微处理器增加数字计算机和数字通信能力，使其成为一个智能化的控制设备，采用双绞线作为总线，将多个具有总线接口的执行器连成网络，按公开、规范的通信协议实现数据传输与信息交换。使用现场总线系统，执行器将原来的集中控制转变为分散控制，简化系统设计，提高了系统运行的可靠性，可为用户节省大量的安装、维护费用 Fieldbus is the development trend in the field of industrial control technology. IQC series actuators use dedicated microprocessors to increase the digital computer and digital communication capabilities, making it an intelligent control device. It uses twisted pair as the bus, connects multiple actuators with bus interfaces into a network, and realizes data transmission and information exchange according to open and standard communication protocols. Using the fieldbus system, the actuator changes the original centralized control into decentralized control, simplifies the system design, improves the reliability of system operation, and saves a lot of installation and maintenance costs for users
安全保护与智能 Security and intelligence
阀门卡住电机的保护 Protection of motor with valve stuck
如果阀门被卡住，当启动信号发出后7秒内无任何动作，逻辑电路可将响应的接触器断开，以防止电机过热 If the valve is stuck and there is no action within 7 seconds after the start signal is sent, the logic circuit can disconnect the responding contactor to prevent the motor from overheating
显示支持 Display support
IQC认识到在任何时候都需要就地和远程阀位指示，即使在执行器电源关断时也是如此。为此IQC内安装了自备电池，以便在电源关断时保持并更新阀门指示，该电池还支持断电时数据记录和调试 IQC recognizes that local and remote valve position indication is required at any time, even when the actuator power is turned off. For this reason, a self-contained battery is installed in IQC to maintain and update the valve indication when the power is off. The battery also supports data recording and debugging when the power is off
富林克致力于作为流体控制专家，负责中国地区RETZ产品的营销管理和服务，从而创造价值的企业，RETZ以“坚持更好的品质”为根本，以“持续实现具有创造性、高品质产品和服务的企业价值，为当今社会的繁荣作出贡献”为企业理念
