产品|公司|采购|招标

内外加热输送带式真空干燥机Inner and Outer Heating Conveyer Belt Type Vacuum Drier

参考价面议
具体成交价以合同协议为准
  • 公司名称四川川大干燥科技工程有限责任公司
  • 品       牌
  • 型       号
  • 所  在  地
  • 厂商性质其他
  • 更新时间2023/3/21 12:06:29
  • 访问次数77
产品标签:

在线询价收藏产品 点击查看电话
四川川大干燥科技工程有限责任公司(简称:川大干燥)是于2001年成立的一家集技术研发、技术转让、装备制造加工的企业。川大干燥行政管理与设计研发部门设在四川大学科技创新中心大楼内;生产和试验科研基地位于成都羊安镇工业园区内,并独自建设有加工制造中心与产品测试展演中心。公司从建立之初即着力科技研发,重心即着力医药、食品等方面的工艺技术研究与先进装备的研制上。公司具有门类学科齐全的专业研发队伍,所研发的产品品质优良、性能可靠、外形美观;经过近三十年的产业技术研究、产品技术研制、产出技术研验,已具有独立自主知识产权的工艺及配方生产技术三项;固体制剂系列装备已研制有十二类近两百种不同规格。而今川大干燥严格按照新版GMP精心研制的制药与食品装备无论是在技术性能上,还是在性价比上都处于同行前列。现“川大干燥”的产品与服务无论在中国还是在世界各国的制药、食品、保健品、动物药业等行业以及其它行业均享有盛誉,已经形成特色与影响力的品牌。川大干燥除了在制药与食品等行业提供良好技术服务与优良产品以外,川大干燥还拥有包括工业粉尘净化回收技术与系统工程装备研制技术、大气净化环保工程装备与家用PM2.5净化器等系列产品技术。川大干燥向提供的优良装备产品有:各种烘干设备、各种造粒设备、各种混料设备、各种粉碎设备、各种筛分设备、各种灭菌设备、各种浓缩提取设备、各种环保设备等等。川大干燥向提供先进的具有自主知识产权的工艺及装备总包的项目有:l 鸡精调味料工艺技术、工艺配方生产技术,鸡精调味料全套生产线。l 高品位高纯度三偏磷酸钠工艺生产技术以及生产线(川大干燥起草的三偏磷酸钠国家标准已于2015年3月正式公布实施)。l 鲜榨提取制取方便型老姜汤冲剂工艺技术以及全套生产线等等。
内外加热输送带式真空干燥机Inner and Outer Heating Conveyer Belt Type Vacuum Drier
内外加热输送带式真空干燥机Inner and Outer Heating Conveyer Belt Type Vacuum Drier 产品信息

带式真空干燥机

一、工作原理及应用范围介绍 

Introduction of Working Principle and Scope of Application


液态物料在真空状态下经圆筒形夹套加热产生的辐射热以及输送钢带承力夹套板加热产生的传导与辐射热综合作用下,通过调节烘干温度以及网带的运行速度让物料从进料端输送到出料端过程中很快的被烘干脱水达到工艺要求,然后在刮料机构清理下将干燥后的物料刮下经专门的出料机构排出,从而达到烘干之目的。广泛应用于医药、食品、化工、生物工程等行业的低温脱水烘干。

    Under the combined action of the radiant heat produced by heating of cylindrical jacket and the conductive and radiant heat produced by heating of transmission steel belt bearing jacket plate, liquid material in the vacuum state is conveyed from the feed end to the discharge end through the adjustment of drying temperature and running speed of wire belt and can be dried and dehydrated quickly in the course and meet the technological requirements. Subsequently, the dried material is scraped by the scraper mechanism and discharged via the special discharging mechanism, so that the drying purpose is achieved. The drier is widely applied for dehydration and drying at low temperature in such industries as medicine, food, chemical engineering and bioengineering.


二、特点 Characteristics


1. 物料在喷雾机构喷雾作用下均匀铺撒于输送干燥板上。铺料以及干燥均匀,料层厚薄可控。

2. 内、外加热,干燥效率高。

3. 真空干燥物料在相对低温下干燥、破坏性小。


1.The material is uniformly spread on the conveying and drying plate under the spray action of spraying mechanism. The material is spread and dried uniformly, and the thickness of material layer is controllable.

2.Internal and external heating ensures high drying efficiency.

3.Vacuum drying material is to dry at relatively low temperature, with low destructiveness.

 

三、技术参数(下表中数值仅供选型时参考)

Technical parameters (the values in the table below are for reference in type selection only)


带式真空干燥机



四、工艺流程图Process flow diagram

带式真空干燥机

带式真空干燥机


对比
客服
手机站
询价
反馈
回首页

提示

×

*您想获取产品的资料:

以上可多选,勾选其他,可自行输入要求

个人信息:

3942